Geothermal Power – a super-hot, international industry primed to scale rapidly
Two June 2026 events, the Super Hot Rocks Summit in Banff and the World Geothermal Congress in Calgary, pointed the same way: superhot rock drilling is ramping up fast. Greg Leveille, GA Drilling board member and former ConocoPhillips CTO, sets out what operators in Oregon, Iceland, New Zealand and Japan expect to deliver by the end of 2027, and what he expects the industry to have achieved by the time it meets again in Nairobi in 2029. Reposted with permission from Tidal Wave Technologies.

Super Hot Rocks Summit
The Clean Air Task Force (CATF) and the Bezos Earth Fund convened a Super Hot Rocks Summit in Banff, Canada, over the weekend of June 6/7.
The event was attended by over one hundred technical experts and leaders of organizations involved with geothermal power production.
The paramount takeaway from the summit was that super hot rock drilling is ramping up rapidly, as evidenced by the following outcomes that geothermal power producers expect to achieve by year end 2027:
- Installation of multiple injector-producer EGS well pairs at over 350 degrees C at the Newberry Volcano in Oregon (Mazama, Quaise),
- The drilling of a super hot rock hydrothermal production well at the IDDP-3 project in Iceland (IDDP-3),
- Production of super-critical fluids from a hydrothermal well to be drilled and completed in the Rotokawa Geothermal Field in New Zealand (GeoShot NZ Project), and
- Selection of a super hot rock test site in Japan from amongst four locations identified as having greater than 100 MWe potential (METI funding).
The second most important take away was that these planned wells, although pushing the envelope of what is possible with existing technologies, have a high probability of being successfully drilled and completed since the operators will be leveraging learnings from prior super hot rock drilling campaigns and a plethora of innovative solutions conceived over the past 18 to 24 months (e.g., Mazama’s 2025 Newberry Volcano Demonstration Project – geology, drilling, completions; Iceland Deep Drilling Project – IDDP Project website ).
And finally, while there are well integrity and reservoir performance issues that could make maintaining production from super hot wells challenging, my sense is that if the operators of these wells are willing to share data and collaborate with other entities pursuing super hot rock production, it will be possible to overcome the technical challenges and deliver attractive rates of return from super hot rock geothermal power production before this decade is out.
Now is therefore the time for forward-looking companies to take advantage of the rapid progress being made by ramping up their geothermal power production investments.
Be bold. Be brave. Be an early mover, not a laggard.
An International Industry Primed to Scale
Over 1,800 geothermal enthusiasts gathered in Calgary during the week of June 8th to participate in the World Geothermal Congress (WGC), which takes place every three years at different locations around our planet.
Since the last WGC took place in September 2023 in Beijing, tremendous progress has been made towards rapid scaling geothermal power output. For example, when the delegates gathered for the last WGC:
- Fervo’s Project Red had yet to commence production, and drilling was just getting underway at Fervo’s Cape Project,
- Mazama’s Newberry Volcano super hot rock demonstration project, which would in late 2025 establish flow between an injector – producer EGS well pair at 331 degrees centigrade (628° F), was in an early planning stage,
- Highly prospective geothermal leases in the western United States could still be purchased for a few dollars per acre (versus hundreds of dollars per acre today; e.g., see New Mexico lease sale results), and
- Zanskar had yet to establish flow from their 44-7 Lightning Dock well, which would set a record for the highest thermal output from a pumped hydrothermal well in the western U.S. when it came online in April 2025.
As exciting as these accomplishments are, they pale beside the results I expect will be delivered between now and when the international geothermal community comes together in Nairobi, Kenya, for WGC 2029. By then,
- Fervo will have commenced production at their 500 MWe Cape project and begun development of their Blanford geothermal project (see Fervo Q1 results summary),
- The number of operators that will have successfully drilled and completed hydraulically fractured horizontal EGS wells will have increased from one to more than ten, with at least one of the operators having accomplished this feat in Europe (i.e., at the Haute Sorne EGS project),
- Zanskar will have more than doubled output from their Lightning Dock hydrothermal field in New Mexico and have several other geothermal development projects underway.
- Production will have commenced at numerous other new hydrothermal fields around our planet,
- Nearly all geothermal power development companies will be targeting wells so as to deliver higher produced fluid temperatures than they had done in the past (e.g., Fervo – Project Red = 175° C; Project Cape = 200° C; Blanford = 290° C),
- Horizontal EGS triplets will have been installed at over 350 degrees centigrade at the Newberry Volcano by Mazama and Quaise, with first commercial production having been achieved by at least one of the two companies,
- IDDP-3 will have been drilled and completed in Iceland as a super critical hydrothermal well,
- New Zealand will have crossed the super critical production threshold at the Rotokawa Geothermal Field, and Japan likely will have tested at least one of the four super critical prospects that they have identified,
- The usefulness of horizontal hydrothermal wells will have been demonstrated (which is a personal goal of mine), with operators openly wondering why they hadn’t adopted this well design sooner (see SGW horizontal well paper),
- Several gigawatts of additional power production capacity will have been brought online, including considerable capacity outside the United States, and
- There will have been substantial progress in advancing a broad array of “pick & shovel” geothermal technologies – technologies that will have improved exploration success rates (e.g., Zanskar’s AI enabled approach to exploration; Ignis H2 Energy’s development technology agnostic approach), driven down well construction costs (e.g., GA Drilling NexTitan technology), ensured the thermal longevity of enhanced geothermal systems (e.g., 400C, TerraFerno, GTO, and NCS sleeve technologies), and made the conversion of heat to power significantly more efficient (e.g., Critical Energy’s modular, factory-assembled ORCs).
And while many of these prognostications may strike some as being far too aggressive, it seems more likely to me that they will on the whole be surpassed by a large degree if members of the geothermal community understand that their true competitors are companies that produce other forms of power, not other geothermal power producers and technology developers.
Now is therefore the time for geothermal developers to be: securing large acreage positions, building up organizational capacity, gaining experience through drilling geothermal wells, and engaging with other members of the geothermal power industry to address key technical challenges, for those that wait for surety before taking action will surely be hugely disadvantaged compared to those that help drive forward progress.
