← Back to glossary
Home
GLOSSARY
Cost per Metre

Cost per Metre

Performance Metrics
Definition
Cost per metre is the total cost of drilling a section divided by the metres drilled, and it is the standard way operators compare drilling performance between wells, tools and formations.

What is cost per metre?

Cost per metre is total section cost divided by metres drilled. It folds rig time, bit cost, tool rental and non-productive time into one number, which makes it easier to compare between wells than rate of penetration alone.

How is cost per metre calculated?

Add rig spread cost for the days spent on the section, bit and tool costs, and the cost of any trips or failures. Divide by the metres drilled. A section that drills fast but needs two extra trips can cost more per metre than a slower section drilled in one run.

Why is cost per metre so high in hard rock?

  • Low rate of penetration: slow drilling keeps the rig on site longer.
  • Abrasive rock: wears cutters, which shortens bit runs.
  • Trips: each worn bit means a bit trip out of the hole and back.
  • Vibration: damaged tools add unplanned trips.

What lowers cost per metre in hard rock?

  1. Hold weight on bit high and steady, so penetration does not fall off through the run.
  2. Control vibration, so cutters and tools last longer.
  3. Drill more of the section in one run, so there are fewer trips.
  4. Choose the bit from offset data rather than habit.

The first three all come back to how force reaches the bit. In deviated and deep wells, friction absorbs 50 to 70% of the weight applied at surface before it gets there (SPE 173024).

Can a downhole tool lower cost per metre?

Tools that apply weight on bit downhole, such as GA Drilling's NexTitan, are built to lower cost per metre. NexTitan applies weight on bit at the bit and holds it steady as the rock changes, which makes runs longer and trips fewer, and fewer trips is where most of the saving comes from. See downhole force control.

To put a number on your own section, use the drilling cost calculator.

Estimate what NexTitan could save on your well

Enter your section length, spread rate and bit cost. Get a modeled savings report.

Take the next step

Drill hard rock with NexTitan

Designed for longer oil & gas wells and deeper, hotter geothermal wells.