Model the savings on your own well.
What is a kickoff point?
The kickoff point (KOP) is the depth at which a well leaves vertical and starts to build angle in directional drilling. Above the KOP the well is vertical. Below it, the build section curves toward the target.
How is the kickoff point depth chosen?
- Target position: a far-away target needs an earlier kickoff or a higher build rate.
- Build rate limits: the planned dogleg severity must suit casing, drill pipe and completion equipment.
- Rock: it is easier to kick off in rock that is firm enough to steer in, but not so hard that building angle is slow.
- Casing points and nearby wells: to avoid collisions on multi-well pads.
How is a well kicked off?
Usually with a mud motor with a bent housing, sliding in the planned direction, or with a rotary steerable system. Whipstocks are used to kick off from inside existing casing, for example for sidetracks.
Why does the kickoff point matter?
A shallow KOP gives a longer, gentler curve but more hole to drill at angle, with more friction and torque. A deep KOP keeps more of the well vertical but needs a sharper build. The choice affects drilling time, casing wear and how much weight on bit reaches the bit later in the well.
To estimate what steadier weight at the bit would be worth below the kickoff point, use the drilling cost calculator.
Drill hard rock with NexTitan
The tool, step by step.
Ask about your well or formation.
