Model the savings on your own well.
What is torque in drilling?
Torque is the turning force applied to the drill string to rotate the bit, usually measured in foot-pounds (ft-lbf) or newton-meters (N·m).
What is the difference between surface and downhole torque?
Surface torque is measured at the top drive or rotary table. It includes the torque needed at the bit plus all the friction between the drill string and the wellbore. Downhole torque, measured by sensors near the bit, shows what the bit itself is taking. In deviated wells most of the surface torque can be friction.
What do torque readings tell you?
- Steady torque: the bit is cutting evenly.
- Rising torque: harder rock, more weight on bit, poor hole cleaning or a tightening hole.
- Cycling torque: a sign of stick-slip, where the string winds up and releases.
- Sudden spikes: the bit or BHA catching on the rock, or a risk of stuck pipe.
What causes high torque?
Friction from high-angle and long wells, tight or poorly cleaned hole, stabilizers dragging on the wall, aggressive bits in hard rock, and doglegs. Torque limits of the drill pipe connections and top drive set how far some wells can be drilled.
How is torque used in drilling calculations?
Torque is one of the inputs to mechanical specific energy, and the rotary part of MSE usually dominates. It is also central to torque and drag modeling when planning extended reach wells.
To estimate what smoother drilling would be worth on your section, use the drilling cost calculator.
Drill hard rock with NexTitan
The tool, step by step.
Ask about your well or formation.
