Model the savings on your own well.
What is measurement while drilling?
Measurement while drilling (MWD) is a set of sensors in the bottom hole assembly that measure the direction of the well and drilling conditions near the bit, and send that data to surface while drilling continues.
What does an MWD tool measure?
- Direction: inclination and azimuth, used to survey the well path.
- Toolface: which way a steering tool or bent motor is pointing.
- Drilling dynamics: vibration, shock, and in some tools downhole weight on bit and torque.
- Temperature and pressure downhole.
How does MWD send data to surface?
- Mud pulse telemetry: the tool creates pressure pulses in the drilling fluid that are read at surface. It is the most common method, but slow, a few bits per second.
- Electromagnetic (EM) telemetry: sends signals through the rock. Faster in some wells, but limited by depth and formation.
- Wired drill pipe: a cable through the pipe gives much higher data rates at higher cost.
What is the difference between MWD and LWD?
MWD measures the well path and drilling conditions. Logging while drilling (LWD) measures properties of the rock, such as resistivity, gamma ray and porosity. Many modern tools do both.
What limits MWD tools?
Heat and vibration. Electronics have temperature limits, a concern in geothermal wells, and shock and vibration are a leading cause of MWD failures. Lateral acceleration above about 25 g is a commonly used reliability threshold (SPE 127413).
To estimate what fewer MWD failures would be worth on your section, use the drilling cost calculator.
Drill hard rock with NexTitan
The tool, step by step.
Ask about your well or formation.
